One of my first homebrewed beers!
This is one of the first beers I ever thought of after I started homebrewing. I remember texting with Hannah during the first few months we we're dating, regarding many different beer ideas and the Jurassic Park concept was one that consistently came up again and again. We eventually came up with the label, and it took over a year to actually get the right recipe together.
My brother made a delicious Founders KBS clone (from Zymurgy via Homebrewtalk) a few months ago, so I decided to take that recipe, and adjust it a bit in hopes of making it a true bourbon barrel stout. Unfortunately, the only barrel I own is a whiskey barrel (small, 5 gallon), so the "bourbon barrel" is actually two parts: 1) I will be putting bourbon-soaked oak chips into the beer late in secondary, and 2) I'm aging it in a (whiskey) barrel. So even though it's not a bourbon barrel, it's still all the elements of a bourbon barrel stout, just in an unconventional fashion.
Sidetrack! Eager to actually upgrade the bland style with my trusty blog. Thoughts about the whole look of http://www.umhn.ca? Truly a savy LGBTQ mental health service in the GTA if wanted in the Ontario territory. Offer your vote. Cheers!
One of the big concerns with the BIAB technique I've been using is that you can only use so much grain, because you're mashing/boiling all in the same containerplus, you need to lift all of the grains out of the kettle at the same time. While seemingly labor-intensive, it actually wasn't so bad. Admittedly, I'm only making a 3 gallon batch, so the 10 lbs of grain wasn't so bad to lift, even when soaked with steaming hot waterespecially with the help of SWMBO. However, because I'm using a 5 gallon pot, there wasn't much room for the grain and 4.25 gallons of strike water.
I also had a few issues (detailed below) with fermentation. My thought it that I may have taken it off the primary yeast cake a bit too early, which stalled around 1.030 for over a week. Fortunately, once I re-pitched US-05 (Safale's American ale dry yeast), it continued to ferment for almost another week. I did a lot of research ("What to do with a stuck fermentation?" and the like), and went with Mike Tonsmeire's suggestion of just pitching US-05, which is a very forgiving, clean, hard-working strain. Looks like that was the way to go. I'll update (below, in the notes section) just how far the gravity got and where it was when I decided to bottle.
What I think happened (which could be completely wrong) was because I pitched two yeasts they either got confused/tiredor (what I've heard happens) one of them dominates the other and basically stops the other from imparting much onto the finished beer. I kind of doubt this, seeing as I pitched two White Labs vials for only 3 gallons of beer, but I supposed anything is possible, especially with such a big, complex beer. The more I research yeasts, the more I realize that they're more than just another ingredient and just how finicky a living organism can beoccasionally yeasts just peter out. And while both yeasts are Saccharomyces cerevisiae strains, and are probably virtually (if not completely) identical, but for some reason they decided to stop fermenting. While they did get pretty far (from 1.092-1.030), they we're supposed to get to significantly lower (1.022).
My wife and I are excited for this beer, not only because of the excessive nerd factor (JP!), but because my brother's version tasted so amazingly good. I figure his version, plus a few months aging in a whiskey barrel couldn't be too bad.
Clever Girl Bourbon Barrel Stout
RECIPE
Batch Size (Gal): 3
Total Grain (Lbs): 10.35
Starting Water (Gal): 4.25
Pre-boil Water (Gal): 3.50
Anticipated OG: 1.093
Anticipated FG: 1.022
Anticipated ABV: ~10%
Anticipated SRM: >50
Anticipated IBU: 38
Mash Efficiency: 70%
Wort Boil Time: 60 Minutes
GRAIN
76.8% 7.95 lbs. Pale Ale
8.7% 0.90 lbs. Oats (flaked)
4.3% 0.45 lbs. Chocolate
4.3% 0.45 lbs. Barley (roasted)
2.9% 0.30 lbs. Crystal 120L
1.5% 0.15 lbs. Black Patent
1.5% 0.15 lbs. Black prinz
HOPS
0.67 oz Nugget (whole, 13% aa) @ 60 mins
0.75 oz Willamette (pellet, 5% aa) @ 25 mins
1.05 oz Willamette (pellet, 5% aa) @ 10 mins
YEAST
White Labs WLP001 California Ale (73-80% attenuation, 68-73F)
White Labs WLP007 Dry English Ale (70-80% attenuation, 65-70F)
Secondary : Fermentis Safale US-05 Dry American Ale (75-80% attenuation, 59-75F)
MASH
60 min @ 155F
ADDITIONS TO BOIL
1.5 oz Belgian bittersweet chocolate (15 mins)
1.0 oz unsweetened cocoa nibs (15 mins)
1.2 oz ground Sumatran coffee (flameout)
1.2 oz cold-brewed Kona coffee (secondary)
NOTES
2/25/12 Brew day! Found the recipe here after my brother told me his version of their recipe turned out quite well (he was right). Did the classic BIAB method on our electric stove. Started with 4.25 gallons of water, ended up with almost exactly 3 gallons. Added the hops, chocolate, and Sumatran coffee as specified above. OG = 1.092. Fermented at 68-70F.
3/16/12 Racked to barrel. Soaked ground Kona coffee in 1 cup boiled, cooled water and leave overnight, covered in refrigerator. Strained out grounds and added cold coffee to secondary. Hydrometer read: 1.030. Problem solving: ordered US-05 (see above for rationale).
4/9/12 Pitched US-05. Was refermenting within hours. Will re-check gravity in a week or soI want this baby to age in the barrel for a few weeks to months (depending on oaky flavor).
4/14/12 After almost a week of bubbling, I decided to take a hydro sample (and a little tastersee below). The beautifully talented US-05 got this sucker down to 1.022 in just 5 days. And a few days later, it was bubbling again!
4/15/12 I let the hydro sample chill in the fridge for a night, letting all the yeastie bits (and chocolate, nibs, coffee, etcman, this is a complex beer!) settle out. This was one of the best non-carbed beers I've ever had. It was a sweet stout, with a lovely bitter coffee aroma and taste to it. Man, I'm excited to get this thing going. Luckily, it hasn't gotten very oaky yet. I think I'll just try to keep my hydrometer out of the cookie jar and maybe take samples every two weeks (or more) from here on out. As soon as the oak flavor is where I want it, I'll bottle this bad boy up!
4/24/12 3 straight days of stable gravity (got down to 1.018). Put in several ounces of toasted oak with bourbon (Buffalo Trace) into bottling bucketafter aging the bourbon/oak for several weeks. Ended up with only 2 gallons (20 bottles total). I'm guessed we lost some to both evaporation as well as some soaking into the barrel. It'll be interesting to see how much flavor of the oak and stout (coffee/chocolate) come out in the sour I racked in there afterwards.
5/4/12 Had my first taste. Damn this beer is good. I might try to submit this to a comp soon. I'll keep this part updated if I do.
Thank you guys! I personally Facebooked my buddie I could mention her great shocking camper rental service in Westfalia Vancouver that careses, https://vancouverwestyrentals.com/ in a nice blog. So if you'll be shopping to find a eurovan camper rental service within the greater British Columbia locale, they actually are really good.
Certainly, I absolutely need to bring up the outline regarding this unique posting had been given via Jason from 5 Star Fence Supply. They really are an outstanding fence and deck suppliers. I definitely treasure a wonderful idea!
Inspirations
http://dean2016.com - Really beautiful web site.
http://perigord.ca - You are a great individual.
http://crystaller.com - Where could I be with out you?
https://beaconsenioradvisors.com - Really good business site.
http://snowremovalfast.ca - You trully are delightful person.
Posted in Home Improvement Post Date 01/16/2024